National Highways is an organisation that has a huge influence on the whole construction sector and is ultimately responsible for keeping the country moving through the management, development and maintenance of the strategic road network. And because of this, it has a major stake in innovations such as Digital Roads that are critical if we're to meet the challenges of climate change, carbon reduction and biodiversity. In the latest in-depth edition of our Think Tank Series podcast, supported by 3D Machine Control and Surveying specialist Leica Geosystems, Malcolm Dare, National Highways Executive Director of Commercial, Supply Chain and Procurement, talks Peter Haddock through a whole range of subjects, mapping out the future direction of the organisation. They talk about: - Delivering Net Zero by embracing innovations across the board - Tackling the skills shortage and attracting new talent  - ESG and measuring social impact  - Working collaboratively with supply chain partners and academics in research partnerships to deliver new materials and ways of working - The need to accelerate change by testing and trialling new solutions and ideas - The potential of technologies like the Cat Command Remote Control Station and autonomous drones   - How carbon emissions can be reduced now and into the future using technologies like 3D machine control and switching to alternative fuels like Hydrogen And throughout the podcast, Malcolm signposts numerous standards and future roadmaps that are already documented whilst also mentioning the imminent publication of exciting future plans. You might need to take notes on this podcast as there is so much information to take in over the 52 minute conversation. A big thanks to Malcolm and the National Highways team for getting involved in this latest episode.   --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

Tier 1 contractor Balfour Beatty is transforming its operations by taking advantage of new equipment and technology. And this is reflected in its recently rebranded Asset and Solutions Division, which is already changing the future delivery of the 500+ project sites it mobilises every year. To find out what the future looks like, Peter Haddock talks to Sean Scarah, Plant and Logistics Director for Balfour Beatty Asset and Solutions Division, for the latest edition of our Think Tank Series, supported by 3D Machine Control and Surveying specialist Leica Geosystems. Think Tank is all about how we should think about getting the most out of the fuel in the Tank. So this episode is all about understanding the complexities of running complex job sites from one of the most experienced professionals in the business. And there are numerous insights that Sean shares with Peter in this episode. Sean: "It's not all about diggers anymore... it's about a whole connected site where 3D machine control and, in the future autonomous plant help to deliver a project and help us on our journey to Net Zero. And to succeed, we all must work more collaboratively together with industry solution and equipment providers as well as supply chain partners, IT specialists and, of course, clients." Thanks for listening to this episode of our Think Tank series, supported by Leica Geosystems, the 3D machine control and surveying specialist. If you like this one, please listen to our other podcast episodes and check out our video interviews from sites and events on our YouTube channel at youtube.com/contentwithmedia. To follow Peter Haddock, visit his profile on Linkedin here https://www.linkedin.com/in/peterhaddock --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

Stage V engines are different, so how will they change the industry, and how can rental companies, in particular, benefit by investing in equipment powered by them? Peter Haddock asks all these questions and more to Dave Stollery of Perkins Engines in the latest edition of our Think Tank Series, supported by 3D Machine Control and Surveying specialist Leica Geosystems. Think Tank is all about how we should think about, in this case, getting the most out of the diesel or HVO fuel in the tank. So this episode is all about productivity, uptime, efficiency, and ultimately reducing carbon emissions by understanding the benefits of equipment using Stage V engines. As Peter discovers in this podcast, a Stage V engine complete with after-treatment needs to be run harder. And thanks to the research and development of Stage V technologies, the increases in engine performance can even reduce the size needed to power a machine. Knowing how to maintain Stage V engines is also important when delivering that vital uptime for rental fleets and end-users. So why not listen to Dave and Peter as they cover the topic in this in-depth podcast. Thanks for listening to this episode of our Think Tank series, supported by Leica Geosystems, the 3D machine control and surveying specialist. If you like this one, please listen to our other podcast episodes and check out our video interviews from sites and events on our YouTube channel at youtube.com/contentwithmedia. To follow Peter Haddock, visit his profile on Linkedin here https://www.linkedin.com/in/peterhaddock --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

How do we solve the skills shortage whilst increasing productivity and reducing CO2 emissions? These are just some of the key topics Peter Haddock discusses with Peter Bell, MD of housebuilding groundworks specialist, Bell Contracting onsite at the new AccXel Construction Training School. In this latest edition of our Think Tank Series supported by Leica Geosystems, Peter Bell talks about how the family business has created key relationships and partnerships with JCB and 3D machine control and surveying specialist Leica Geosystems to change the way the business operates. It's a process that has delivered significant benefits allowing Bell Contracting to grow whilst establishing itself as a key supply chain partner for some of the UK's largest housebuilders. Peter Bell: "The group has a turnover of around £90m, which is made up of three divisions, Bell Contracting, Bell Plant and Bell Homes. Our growth has accelerated dramatically over the last decade as we have changed the way in which we approach working with our customers, who are some of the major housebuilders in our region. "Those customers wanted more of a partnership approach, so we recognised we had to solidify our own approach to partnerships within our core supply chain and, in particular, the plant we use. So we started to work with our local JCB dealer, Holt JCB and JCB Finance to look at how we could manage our fleet and get the right equipment matched for the jobs onsite. "The aim was to develop a better approach to managing the movement of muck that was safer and more efficient. This also involved changing our methodologies and how team members worked together, from engineers to surveyors, site managers and operators. As part of this process, we created another more technically orientated partnership with Leica Geosystems, combining surveying, 3D modelling and machine control as one seamless delivery model. "It has been a revolution for our business. You know, I never believed that you would get 55 year old excavator drivers to buy into a machine control solution within 24 hours, but it happened to us. And the productivity of the jobs we are now doing is off the scale. We don't bang pegs in the ground anymore. Everything's built on a 3d model, and it's effectively plugged into the machine. "My excavator drivers and my foreman can actually physically see what they're actually trying to achieve right in front of them. And now they don't have to be close to the machine or climb into trenches anymore.” Thanks for listening to this episode of our Think Tank series, supported by Leica Geosystems the 3D machine control and surveying specialist. If you like this one, please listen to our other podcast episodes and check out our video interviews from sites and events on our YouTube channel at youtube.com/contentwithmedia. To follow Peter Haddock visit his profile on Linkedin here https://www.linkedin.com/in/peterhaddock --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

For our Bauma 2022 show special, supported by 3D machine control and surveying specialist, Leica Geosystems, host Peter Haddock talks to Mark Crawford, the Digital Plant Manager for leading UK Tier 1 contractor, Balfour Beatty. This episode was recorded at Hexagon Live in Las Vegas following the launch of new surveying and construction sector technologies.  Mark joined Balfour Beatty in his new role during the pandemic and has been heavily involved in accelerating the digital roadmap for the business.  Mark: "The digitalisation of the mobile plant sector is all about the connectivity of the plant itself, the available technology and what capability that can deliver for our clients." Mark is also heavily involved in the National Highways (the organisation that looks after the UK's motorway network) Connected and Autonomous Plant (CAP) Group, which works together to revolutionise the construction sector. Mark: "Working with the CAP group National Highways has set out a roadmap for the future delivery of projects, and this has influenced our own roadmap to deliver projects for the organisation. It has already led to us accelerating programmes that include the interlinking of telematics data from across our fleet and supply chain.  "This includes how we move data from the office to the field, and the creation of our own digital toolset. Through collaboration and training across our business and supply chain we are ensuring everyone is now working on a consistent platform, with one version of the truth, so that we can ultimately achieve our Net Zero aims. And as a leading contractor, it is our goal to develop a roadmap that is capable of achieving the needs of all our customers.  "For example, in order to support National Highways, we need to work a couple of years in advance to ensure the whole supply chain and technology is available, tested and ready to deliver. This requires us to walk back from the date of compliance with everyone involved and to challenge the OEMs and technology providers to have solutions available for our supply chain to adopt. So it's a complex and continuous process that will require investment in both equipment and people to deliver." Thanks for listening to this episode of our Think Tank series, supported by Leica Geosystems the 3D machine control and surveying specialist. If you like this one, please listen to our other podcast episodes and check out our video interviews from sites and events on our YouTube channel at youtube.com/contentwithmedia. To follow Peter Haddock visit his profile on Linkedin here https://www.linkedin.com/in/peterhaddock --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

How can the plant sector plan for a digital journey whilst focusing on the bigger Net Zero picture by reducing fuel burn and carbon emissions? These are some of the questions Peter Haddock asked Sam Mercer, COO of leading plant hire specialist Plantforce. In this Think Tank podcast, they talk about how the business has moved forward, forging key industry partnerships whilst taking a transparent approach to working with clients to deliver projects like HS2.  Whether it's working with OEMs like Kobelco to introduce semi-automatic machines with Leica Geosystems 3D machine control, used with an SMP Parts tiltrotator. Or looking at data-led insights with telemetry partner MachineMax, the business continues to grow and challenge itself.  But it's the people that matter. Here, training partnerships with Weston College and LP Training are making that all-important difference in upskilling existing operators and managers, whilst supporting new operators into the workforce through apprenticeships and specialist training.  In addition, Sam gives us an insight into how the business will be expanding its national footprint and how all of its fleet of over 2000 units is HVO ready.  Its connected site approach was also recently highlighted at the Futureworx show, where real-time data from a site was beamed into the event, you can see video interviews at this site in this playlist on YouTube:  https://youtube.com/playlist?list=PLCLBoV6tjTs_4LUummupvlBBbGytWXmhG If you like this episode, please listen to our other podcast episodes and check out our video interviews from sites and events on our YouTube archive channel at youtube.com/contentwithmedia. To follow Peter Haddock, visit his profile on Linkedin here https://www.linkedin.com/in/peterhaddock --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

Want to know what the future looks like for National Highways?  Then this is the podcast for you as Muneer Akhtar talks to Peter Haddock about the challenges the sector faces and how National Highways is on the road to Net Zero.  Through his work with the Connected Autonomous Plant Group, Muneer talks about technology adoption, innovation, people, skills and much more.  This is a real insight into how National Highways is looking to work with businesses to deliver better outcomes for those using its infrastructure and those building and maintaining it.  It's another Think Tank episode from our series supported by Leica Geosystems, where Peter looks into how we can get more from every drop of fuel.  If you like this episode, please listen to our other podcast episodes and check out our video interviews from sites and events on our YouTube archive channel at youtube.com/contentwithmedia.  To follow Peter Haddock visit his profile on Linkedin here https://www.linkedin.com/in/peterhaddock --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

For this special National Apprentice edition of the Content With Media podcast, supported by the Construction Equipment Association, host Peter Haddock talks to two apprentices Jack and Sam at British Steel about their experiences. Peter also talks to Tony Malone and Andy Clark who are part of the apprentice training and support team, mentoring those working at its Northern Mills. Both Tony and Andy also went through the apprentice scheme and with over 40 years of experience each, it is great to see them giving back to the next generation. Finally, Peter closes off the podcast by talking to Suneeta Johal the CEO of the Construction Equipment Association about why skills development and apprenticeships are so important to the industry and its members. --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

In our final episode of the 'Think Tank' Series for 2021, Peter Haddock talks to Alasdair Reisner, CEO of the Civil Engineering Contractors Association (CECA).  Alasdair talks about the new 'Industrial Skills Plan for the UK Construction Sector 2021 - 2025', launched earlier this year, and available from the Construction Leadership Council's website at this link https://bit.ly/3pX1LA0 Peter and Alasdair also discuss diversity and inclusion as well as a focus on respect in the industry to ensure we can both attract and keep talent.  Alasdair: "Why wouldn't you want to be in the construction industry when you can fundamentally be part of a digital industrial revolution in a sector that's got so much potential to change people's lives for the better." Thanks again to our sponsors Leica Geosystems, part of Hexagon, for supporting our podcast series. If you want to know more about how its surveying and 3D machine control equipment and software solutions can help you be more efficient and productive, visit www.leica-geosystems.com The topics covered in this podcast are going to be a big part of our content creation in 2022, so watch this space and the content we post on our social media channels by connecting with us through the links below Connect with Peter Haddock on Linkedin https://www.linkedin.com/in/peterhaddock/ Like our Facebook page  https://www.facebook.com/contentwithmedia/ Subscribe to our YouTube video channel https://www.youtube.com/contentwithmedia Follow us on Instagram  https://www.instagram.com/contentwmedia/?hl=en Follow us on Twitter https://twitter.com/contentwithmed1  --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

THINK TANK SERIES EPISODE 4: Joining host Peter Haddock for the fourth in our new 'Think Tank Series', sponsored by our friends at Leica Geosystems, the 3D machine control and surveying specialist, is James Cadman, plant sector expert for the Sustainability Supply Chain School.   In this special COP26 (Climate Change Summit) episode, James returns to the podcast to talk to host Peter about all of the challenges the industry faces to play its part in tackling climate change. They discuss what has changed in the industry since the Sustainability Supply Chain School Plant Charter was launched last year.  They also talk about what the industry needs to do to reduce emissions by being better custodians of the environment and delivering social value to the communities in which we all work. James: "You only have to look at the recent announcement from the Construction Leadership Council in its 'Construct Zero Performance Framework' to see that we have some major milestones to reach. They stated that the framework wanted to reduce diesel plant onsite by over 70% by 2035.  "That is a big task and not one we are going to solve overnight. But we can already see innovations coming to market and the rapid adoption of technology like 3D machine control. And there will be more technological advancements coming down the road. To meet these stringent targets, the answer is never going to be a one size fits all solution. We already have HVO biofuels, electric and now hydrogen advancements." It's a huge subject to tackle in a podcast, but we hope it will help listeners think about how they can play a role in delivering better environmental outcomes, both locally and globally.  The Sustainability Supply Chain School also offers the industry a huge amount of resources free of charge to support learning, and you can access its library by visiting its website. You can also find out more about the plant charter in the link below:  www.supplychainschool.co.uk/partners/groups/plant-group/plant-charter/ We would like to thank our sponsor, Leica Geosystems, for supporting this 'Think Tank Series' episode. You can find out all about how its surveying and 3D machine control equipment and software solutions can help you reduce emissions and more at leica-geosystems.com --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

For our 50th podcast special edition, host Peter Haddock is joined by construction and plant sector communications specialists. They include 'Construction Collective' colleagues and founder members, Mark Anthony and Nick Drew, with special guest, PR & Communications guru, Louise Carney. They discuss how using the Three C's - Collective - Collaborative - Communications, can support better marketing and communication outcomes for businesses in the sector. The team talk about the importance of a digital communications strategy and how to work with influencers in a post pandemic world, explaining some of the positive outcomes that have already been achieved on key issues, through industry collaboration. Mark Anthony is an experienced journalist with over 30 years in the plant sector. He runs 'Demolition News' and 'Diggers & Dozers' channels on social media. He is also the 'Live Show King' having hosted over 300 live shows since March 2020. Every week day Mark hosts a live show at 10am on Linkedin and Facebook. https://www.facebook.com/demolitionnews. Nick Drew is an experienced plant operator with over 30 years in the seat. He has been blogging for decades and runs the successful Digger Man Blog Facebook channel, as well as his popular Digger Man Blog Instagram page. Nick also writes for leading industry magazine Earthmovers, which features his regular blog, which has over 200 posts a year. Blog channel - https://www.earthmoversmagazine.co.uk/digger-man.htm Louise Carney is an industry PR and communications specialist, working for clients like the Construction Equipment Association and Xwatch. Her connections and experience in the industry are unrivalled, thanks to her approach to collaborative communications. You can find Louise on Linkedin - https://www.linkedin.com/in/louiseamurphy/ Peter Haddock is the owner of Content With Media, he works with clients in the industry, writes for five industry magazines and is a podcast and video host, regularly going live on Linkedin and Facebook. You can find him on Linkedin - https://www.linkedin.com/in/peterhaddock/ --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

THINK TANK SERIES EPISODE 3: Joining host Peter Haddock for the third in our new 'Think Tank Series', sponsored by our friends at Leica Geosystems, the 3D machine control and surveying specialist, is Andy Wright CEO of Sunbelt Rentals UK. In this episode, Peter and Andy talk about the record-breaking deal Sunbelt Rentals UK has signed with JCB. They continue onto the subject of sustainability and how the business is driving change as it works towards transforming the 'Future of Rental' With over 2200 units set to be delivered by the end of 2021, the JCB deal is not just about numbers, it's about the fact that 92% of equipment is Stage V compliant or Electric. Each asset is also connected, as is its huge and diverse fleet of equipment. This means that customers can monitor asset performance through its 'Command Centre' customer portal and make both commercial and environmental decisions based on utilisation.  In Andy's words, "We take sustainability very seriously, and we put our money where our mouth is. This JCB deal is not just a 'green' order. It's focused on safety and the provision of the data and information our customers want on the equipment they are renting from us. By showing customers the impact this equipment has on their sites, we help them be more productive and recognise when items are under-utilised. But most importantly, we build in safety to our equipment purchases and reports. For example, we have forward cameras on all the new JCB dumper, and everything is connected to the JCB Livelink telemetry solution through our Command Centre Portal." It's a fascinating insight into how Andy and the team see the 'Future of Rental' developing, and we hope you enjoy listening to it.   And thanks to our sponsors, Leica Geosystems, for supporting the third episode in our new Think Tank Series. You can find out all about their surveying and 3D machine control equipment and software solutions at leica-geosystems.com --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

THINK TANK SERIES EPISODE 2: Joining host Peter Haddock for the second in our new 'Think Tank Series', sponsored by our friends at Leica Geosystems, the 3D machine control and surveying specialist, is Eric Desaulniers, President & CEO of graphite mining specialist Nouveau Monde Graphite.  In this episode, Peter and Eric talk about a World first deal that Nouveau Monde Graphite has made with the mining team at Caterpillar to electrify its Graphite mine in Canada. It's an amazing story that will help to transform the mining industry into a greener and more environmentally productive sector. It will start with Caterpillar developing an entire fleet of battery-powered electric machines that will mine the graphite needed to create the batteries they run on.  In turn, this will create a mining circular and green economy. What is also super exciting is that the power they use will be green as it comes from hydroelectric power generation fed into the site through a high voltage cable. Both companies will work together to develop and test the technology, sharing the journey to battery mining with other global players, so that everyone can benefit.  The knowledge gathered will also support the next generation of machines as technology and the mine move forward. Peter and Eric even talk about the potential for hydrogen and how Nouveau Monde Graphite will be at the cutting edge of every advancement in the future. It is a fascinating subject we hope you will enjoy.  You can also read an interview with Eric Desaulniers by Peter Haddock in the future December 2021 edition of Earthmovers Magazine. To purchase a print or digital copy, visit www.earthmoversmagazine.co.uk We also wanted to thank our sponsors, Leica Geosystems, for supporting the second episode in our new Think Tank Series. You can find out all about their surveying and 3D machine control equipment and software solutions at leica-geosystems.com --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

THINK TANK SERIES LAUNCH EPISODE: Joining host Peter Haddock for the first in our new 'Think Tank Series', sponsored by our friends at Leica Geosystems, the 3D machine control and surveying specialist, are members of the new Lynch Plant Hire machine control division. They include Paul Keenan, Gez Bonner, Chris Kent and James King.  In this episode, we talk onsite and in the studio to the team about the huge investment that Lynch Plant Hire has made to develop its new division and its impact on reducing carbon emissions whilst increasing productivity and efficiency. Its new division is rolling out 3D machine control throughout the Lynch Plant Hire fleet of equipment from excavators to dozers and more. It represents the most ambitious technology investment program in the companies history, which is set to position the business as a leader in the 'Connected Worksite' of the future.  Paul Keenan has led the project to create the division: "Our vision when setting up the division was to have our own specification for machine control. Therefore, we have teamed up with Leica Geosystems and Trimble through its dealer Sitech UK & Ireland to connect every single one of our machines in the division. In doing this, we will offer our own remote support to customers, solving over 90% of issues without even going to the site. This allows customers to really take advantage of all the benefits the Connected Worksite delivers. We have then created our operator training school where each operator goes through one on one training to ensure they know how to use the machine control system before they get to a work site." "This will make our operators an invaluable part of the project team as they will be able to make the machine into a surveying tool, feeding back readings to our team for 'As-Built' data to be sent to the customers. We now have a 360-degree approach with everyone knowing what is happening and where we are against programme time." Peter Haddock added: "What has impressed me about the creation of the Lynch Plant Hire machine control division is its attention to detail. The team has gone through every element of technology, training, support and collaboration when putting this together. I see this approach as a blueprint for the delivery of a "Connected Worksite'. It is a vision to professionalise the industry and deliver great outcomes for the safe delivery of projects, whilst reducing emissions and the overall impact on the environment." You can also read an interview with Paul Keenan by Peter Haddock in the November 2021 edition of Earthmovers Magazine. To purchase a print or digital copy, visit www.earthmoversmagazine.co.uk We also wanted to thank our sponsors, Leica Geosystems, for supporting the first episode in our new Think Tank Series. You can find out all about their surveying and 3D machine control equipment and software solutions at leica-geosystems.com --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

PODCAST WITH INSIGHT: Joining host Peter Haddock for this latest podcast, sponsored by our friends at used equipment specialist Ritchie Bros UK, is Vinnie Quinn, the Director of Construction Camera Specialist, Evercam. Vinnie has a vision for how clever cameras can help us integrate and change the industry we work in, keeping people safe whilst increasing productivity and efficiency.  Clever cameras can now do this by integrating feeds using clever software as he explains in this in-depth podcast.  Vinnie: "By capturing and defining what is happening on site from day one, you can look back at activity and even answer queries from supply chain members on things like aggregate deliveries, etc. You can even spot anomalies where a truck might not have gone over a weighbridge due to onsite issues. "But it's the real-time activity that is so important when it comes to operating a site more efficiently. This is where clever cameras can make all the difference. Providing live and recorded access to images and data to QS, Logistics Manager and H&S managers also speeds up decision making and dispute resolution." You can also read an interview with Vinnie Quinn by Peter Haddock in the October 2021 edition of Earthmovers Magazine. To purchase a print or digital copy, visit www.earthmoversmagazine.co.uk We also wanted to thank our sponsors, Ritchie Bros UK, for supporting this episode, and you can find out how to buy, sell or even sell directly to them at www.rbauction.co.uk, they just want to do business with you. --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

PODCAST WITH INSIGHT: Joining host Peter Haddock for this latest podcast, sponsored by our friends at used equipment specialist Ritchie Bros UK, is Ernie Locke, the Detective Inspector leading the new Opal ACE national police intelligent unit for agricultural and construction equipment. Ernie is an experienced and passionate police officer joined by an equally skilled team that will support the industry to tackle the growth in plant theft. In this in-depth interview, he explains how the ACE team will use a 4P's strategy of prepare, prevent, protect and pursue to disrupt their criminality. ACE is part of Opal, which is the national intelligence unit focused on serious organised acquisitive crime (SOAC) across the UK. In this podcast, Ernie explains how the work Opal has already done will benefit ACE and help to tackle the scourge of Organised Criminal Gangs (OCG's) in particular, both regionally, nationally and internationally. Ernie also explains how support and funding from industry bodies like the Construction Equipment Association and insurers have helped create the unit, which can grow in the future. There is so much to think about in this podcast, and as an industry, we need to support the ACE team, so if you want to get in touch to do, share information or simply ask a question, you can get in touch with them at opal@westmercia.pnn.police.uk You can also read an interview with Ernie Locke by Peter Haddock in the September 2021 edition of Earthmovers Magazine. To purchase a print or digital copy, visit www.earthmoversmagazine.co.uk We also wanted to thank our sponsors, Ritchie Bros UK, for supporting this episode, and you can find out how to buy, sell or even sell directly to them at www.rbauction.co.uk, they just want to do business with you. --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

PODCAST WITH LEADERSHIP: Joining Peter Haddock for this latest podcast, sponsored by our friends at surveying and 3D machine control specialist, Leica Geosystems, part of Hexagon, is Lee Gansler, MD of Buckhurst Plant Hire. After joining the business some 20 years ago, Lee has worked his way from the Hire Desk, right through to the role of MD. In this podcast, his enthusiasm for the industry is infectious, as he talks about the collaborative approach Buckhurst Plant Hire takes with customers.  He also explains how the diverse business operates and the millions it's investing in new equipment, technologies and people. Not forgetting the expansion of its national network and its approach to helping customers become more sustainable, through initiatives like more informative equipment handovers, that now include its new Stage V machines.  We even learn how technology is supporting fault finding and how customers can see telemetry information that can improve outcomes onsite.  You can also read an interview with Lee Gansler, by Peter Haddock in the August 2021 edition of Earthmovers Magazine. To purchase a print or digital copy visit www.earthmoversmagazine.co.uk We also wanted to thank our sponsors Leica Geosystems for supporting this episode and you can find out all about their surveying and 3D machine control equipment and software solutions at leica-geosystems.com --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

PODCAST WITH INSIGHT: Joining Peter Haddock for this Content With Media podcast, sponsored by our friends at used equipment specialist Ritchie Bros. is Arron Acosta and Ken Gray. Arron is the CEO and Ken is Vice President of Rise Robotics, which has developed new innovative & connected hydraulic solutions for the construction sector, that is set to dramatically improve performance, reliability and carbon emissions. The savings are electric as the technology replaces the traditional hydraulic system with an electromechanical, fluid-free alternative that uses 65-90% less power to push or pull loads. Arron and Ken talk about overcoming the barriers that have prevented innovation in the sector that uses one electromechanical component to raise the load and then put the energy back when it is lowered. There is no heat generation so it can be air-cooled and it has the potential to reduce maintenance costs dramatically, not to mention the fact it’s fast, very light and the system talks to you, because it’s a connected device. Arron "It's the return of the old cable design with a new technological twist that reduces energy consumption" Now is the time for this technology, as there is a much greater increase in hydraulic demand from machines today, due to more attachments like tiltrotators being used. With hydraulic capability set to continue to increase, the energy savings are potentially huge. Want to know more, go to www.riserobotics.com --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

PODCAST WITH LEADERSHIP: Joining Peter Haddock for this latest podcast, sponsored by our friends at surveying and 3D machine control specialist, Leica Geosystems part of Hexagon, is Matthew Ayres, Group MD of Bennie Group which includes Barton Plant. As one of the youngest leaders in our industry at just 28, Matthew brings a great deal of passion and enthusiasm to this episode, sharing his insights on a whole range of subjects from diversity and inclusion to safety, technology and how we drive the industry forward.  Matthew also explains how a mistake has led him to be a vocal advocate for greater diversity and inclusion in our industry, which Content with Media is supporting in this podcast and other content we produce. With this in mind, we also want to highlight a very personal and insightful article Matthew wrote for the CBI entitled 'How a mistake made me a more diverse leader' It is also why we have chosen to use the Cat D6 picture with Matthew displaying LGBT colours in our promotion of this podcast. Here is the link to the article below: https://www.cbi.org.uk/articles/how-a-mistake-made-me-a-more-diverse-leader/ You can also read an article by Peter Haddock in the May 2021 edition of Earthmovers Magazine entitled 'Changing Attitudes'. You can purchase a print or digital copy at www.earthmoversmagazine.co.uk We also wanted to thank our sponsors Leica Geosystems for supporting this episode and you can find out all about their surveying and 3D machine control equipment and software solutions at leica-geosystems.com  --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message

PODCAST WITH INSIGHT: Joining Peter Haddock for this Content With Media podcast, sponsored by our friends at used equipment specialist Ritchie Bros. is William Tebbit He is the CEO of fuel specialist Green Biofuels Ltd, which has developed a new high-performance Green D+ sustainable HVO derived fuel.   In this in-depth podcast, William talks about the huge impact of the changes to the Red Diesel subsidy and the big impact HVO is set to have in the sector, particularly as Tier 1 contractors like Skanska are now mandating HVO across projects.  With carbon emissions now well and truly in the spotlight, this is such an important podcast to explore how as an industry we can improve our impact on the environment.  To get in touch with us email content@contentwithmedia.com If you want to know more about our sponsors Ritchie Bros and how to Buy with them, Sell with them or Sell to them, visit rbauction.co.uk, as they want to do business with you. Happy listening --- Send in a voice message: https://podcasters.spotify.com/pod/show/contentforindustry/message